5 mm x 7 mm ceramic package smd oscillator, lvpecl / lvds ism99 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 8/28/12_d specifications subject to change without no tice page 1 pin connection 1 enable 2 n.c. 3 gnd 4 output 5 comp. output 6 vc c recommended pad layout dimension units: mm product features: applications: surface mount package test equipment reflow compatible server & storage compatible with leadfree processing sonet /sdh note: a 0.01 f bypass capacitor is recommended between vcc (p in 6) and gnd (pin 3) to minimize power supply noise. ** not available for all temperature ranges. *** frequency, supply, and load related parameters. frequency 180 mhz to 622.08 mhz output level lvds lvpecl vod = 393 mv typ., 475 mv max. ?0? = vcc - 1.63 v max. ?1? = vcc - 1.02 v min. duty cycle specify 50% 10% or 5% see table in part number guide rise / fall time 0.6 ns max. output load lvds lvpecl 100 ? differential 50 ? to vcc - 2.0 vdc frequency stability see frequency stability table in part number guide (includes room temperature tolerance and stability over operating temperature) start-up time 10 ms max. enable / disable time 100 ns max. supply voltage see input voltage table, tolerance 5 % current lvds = 90 ma max. *** lvpecl = 130 ma max. *** rms phase jitter 0.5 typical, 1 ps max. (12 khz to 20 mhz) operating see operating temperature table in part number guide storage -55 ? c to +125 ? c part number guide sample part number: i sm99 - 3159bh - 180.000 package input voltage operating temperature symmetry (duty cycle) output stability (in ppm) enable / disable frequency i sm99 - 3 = 3.3 v 1 = 0 ? c to +70 ? c 5 = 45 / 55 max. 8 = lvds **a = ? 25 h = enable - 180.000 mhz 7 = 3.0 v 6 = -10 ? c to +70 ? c 6 = 40 / 60 max. 9 = lvpecl b = ? 50 2 = 2.7 v 3 = -20 ? c to +70 ? c c = ? 100 6 = 2.5 v 4 = -30 ? c to +75 ? c 2 = -40 ? c to +85 ? c
5 mm x 7 mm ceramic package smd oscillator, lvpecl / lvds ism99 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 8/28/12_d specifications subject to change without no tice page 2 pb free solder reflow profile: typical application: *units are backward compatible with 240c reflow processes package information: msl = n.a. (package does not contain plastic, storage life is unlimited under normal room conditions). termination = e4 (au over ni over w base metalization). tape and reel information: environmental specifications thermal shock mil-std-883, method 1011, condition a moisture resistance mil-std-883, method 1004 mechanical shock mil-std-883, method 2002, condition b mechanical vibration mil-std-883, method 2007, condition a resistance to soldering heat j-std-020c, tabl e 5-2 pb-free devices (except 2 cycles max) hazardous substance pb-free / rohs / green compliant solderability jesd22-b102-d method 2 (preconditioning e) terminal strength mil-std-883, method 2004, test condition d gross leak mil-std-883, method 1014, condition c fine leak mil-std-883, method 1014, condition a2, r1=2x10-8 atm cc/s solvent resistance mil-std-202, method 215 marking line 1: ilsi and date code (yww) line 2: frequency quantity per reel 1000 a 16 +/-.3 b 8 +/-.2 c 7.5 +/-.2 d 17.5 +/-1 e 50 / 60 / 80 f 180 / 250
|